— TROUBLESHOOTING CHECKLIST / Nov 7, 2026

     
List -1 List-2

[JK-HAIRCOAT™ — TROUBLESHOOTING CHECKLIST*/nov 7, 2026 ]

After you wake up, please review the following checklist and reply to Check #1, Check #6, and Check #10 first.

You can answer the remaining questions later.

JK-HAIRCOAT™ — TROUBLESHOOTING CHECKLIST

Identifying the Possible Cause of the Problem

To help me identify the possible cause of the problem you experienced with JK7882-SEV, I would like to review how you prepared, applied, and dried the product, as well as the characteristics of the hair you treated.

Please answer the following questions as accurately as possible.

If you are unsure about any particular detail, simply let me know. There is no need to guess.

Check #1 — Final Results After Drying

After the treated hair was completely dry, what changes did you notice?

Please describe the results regarding:

- Softness
- Smoothness
- Shine
- Combability (ease of combing)
- Stickiness
- Oiliness or greasy feeling
- Any other noticeable changes

Please also explain what you mean by the problem you experienced and how the treated hair compared with the same hair before treatment.

Check #2 — Hair Length and Weight

- Hair length (inches or cm)
- Approximate weight of the hair, weft, wig, or hairpiece treated (grams)

Check #3 — Hair Origin and Characteristics

- Hair origin: China, Russia, India, Vietnam, etc.
- Hair type: Remy, non-Remy, or unknown
- Previous processing: bleaching, dyeing, perming, coating, silicone treatment, etc.
- Hair color before applying JK7882-SEV

If you do not know the hair's origin or processing history, please indicate "Unknown."

Check #4 — Type of Hair Product

What type of hair product did you treat?

For example:

- Loose or bulk hair
- Machine-made weft
- Machine-made wig
- Hand-made wig
- Hairpiece or toupee
- Hair topper or closure
- Other

Check #5 — Water Used for Treatment

- Type of water: tap water, filtered water, distilled water, etc.
- Water temperature before adding JK7882-SEV (°C or °F)
- Exact amount of water used (mL or liters)

I may also ask about the water's pH level later, if necessary.

Check #6 — JK7882-SEV Mixing Ratio

- Exact amount of JK7882-SEV added to the water (grams or mL)
- Did you measure the JK7882-SEV by weight or by volume?
- How did you measure it (measuring cup, syringe, scale, etc.)?

Check #7 — Preparation of the Treatment Solution

- Did you add JK7882-SEV to the water or add water to JK7882-SEV?
- How did you mix or stir the solution?
- Approximately how long did you stir it?
- Did you use the solution immediately after mixing, or was there a delay?

Check #8 — Hair Treatment Procedure

You mentioned that you dipped the hair for 10 seconds, removed it, and then dipped another one for 10 seconds.

Please confirm:

- Were these two separate hairpieces, or did you treat the same hairpiece twice?
- Was each hairpiece immersed completely in the solution?
- Was the hair combed while immersed in the solution?
- Was the hair rinsed with clean water after treatment?

Check #9 — Removal of Excess Solution

After removing the hair from the treatment solution, how did you remove the excess liquid?

For example:

- Squeezing by hand
- Spin drying in a washing machine
- Absorbing with a towel
- Allowing the liquid to drip off naturally
- No particular method

Check #10 — Drying Procedure

- Drying method: air drying, oven drying, hair dryer, etc.
- Drying temperature (°C or °F), if applicable
- Approximate drying time
- Was the hair completely dry before you checked the results?

---

ADDITIONAL INFORMATION

If possible, please send me photographs or a short video showing the treated hair and the problem you experienced.

You do not need to answer everything at once. You may reply section by section.

My purpose in asking these questions is to understand exactly what happened, identify the possible cause, and help you achieve better results with JK-HairCoat.

Thank you for your patience and cooperation.

Best regards,

John Yim
President
JOHN KOREA CO.

 

FIRST TRIAL ORDER KIT ( 3 OPTIONS: A, B, C)

  • Option A: 1 formulation: 1 × 200 g container

  • Option B: 2 formulations: 2 × 80 g containers (Currently upgraded to 2 × 100 g)

  • Option C: 3 formulations: 3 × 50 g containers (as shown in the photo at left)
    (Currently upgraded to 3 × 60 g)

    Temporary Quantity Upgrade — November 2026

    We currently have a limited supply of lighter packaging boxes,
    allowing us to include more JK-HairCoat while keeping the total shipping weight within 0.5 kg.

    As a result, we can provide the increased quantities shown above at no additional charge, without moving into a higher shipping weight bracket.

    This temporary quantity upgrade is available only while our limited supply of lighter packaging boxes lasts.

First Trial Order Kit (One-Time Offer for First-Time Customers)

Our standard sales policy is:

  • Minimum Order Quantity (MOQ): One 200 g container per formulation
  • Minimum Order Value (MOV) as shown in our price list by order quantity

Under our normal sales policy, the MOQ and MOV are the same.

However, as a one-time exception for first-time customers, we offer a First Trial Order Kit.
This allows you to compare different JK-HairCoat formulations before selecting the one that best suits your products.

The First Trial Order Kit is available in the following options:

  • Option A – 1 formulation: 1 × 200 g container

  • Option B – 2 formulations: 2 × 80 g containers

  • Option C – 3 formulations: 3 × 50 g containers (as shown in the photo below)

Why 80 g, 50 g, or 35 g instead of simply dividing 200 g?

The Trial Kit quantities are not calculated by simply dividing 200 g by the number of formulations.

When more formulations are selected, more bottles, caps, labels, and packing materials are required. This increases the total gross shipping weight.

For example, one 200 mL bottle weighs approximately 30 g, while two 100 mL bottles weigh approximately 50 g in total.
Additional bottles and packing materials therefore add extra weight to the parcel.

For this reason, if two formulations are selected, we do not simply pack 100 g + 100 g. We reduce the quantity to 80 g + 80 g to help keep
the completed parcel within the lowest FedEx weight bracket, including a practical safety margin.

The same principle applies when three or four formulations are selected:

  • 1 formulation: 200 g

  • 2 formulations: 80 g each

  • 3 formulations: 50 g each

  • 4 formulations: 35 g each

In short, the more formulations and containers included, the less net product weight can be packed while keeping the parcel
within the lower international shipping-weight bracket.

   

200 ml Bottle

This 200 ml bottle is typically used to fill
approximately 200 g of JK-HairCoat product,
depending on formulation density.

100 ml Bottle

This 100 ml bottle is typically used to fill 100 ml, 80 mn, 50 ml for a Trail Sample Kit

1 Liter Bottle

This 1 liter container is typically used to fill
approximately 1 kg of JK-HairCoat product,
depending on formulation density.

FEATURES JK-HairCoat is formulated with high-grade cosmetic raw materials,
engineered to be safe for both the environment and the human body.
STORAGE Store JK-HairCoat in a cool, shaded place (5–25°C),
away from direct sunlight, following standard chemical storage practices.
SHELF LIFE Minimum shelf life of 3-5 years when stored under recommended conditions.
PACKAGE UNIT Mimimum Package Unit (MOQ): 200 g.
For shipping safety, bulk packaging is available in strong plastic containers of 0.5 kg, 1 kg, 2 kg, 5 kg, and 10 kg (10 liters).
APPLICATION Application instructions are simple. Please contact us for detailed guidance.
99.99% of hair goods available on the market are treated with wig oils or silicone-based industrial oils to create a silky, soft,
wet, or healthy-looking appearance.

However, these wig oils are not permanent and are removed after one wash, or a few washes at most—similar to makeup being washed off the face.

Moreover, wig oils do not restore damaged hair.

In contrast, our Permanent John-HairCoat products provide long-lasting effects because they are ionically bonded to
human hair and synthetic fibers, forming a unified structure.

Within seconds after applying the HairCoat conditioner mixture by spraying, the permanent hair coating process is completed.
Immediately after application, the hair can be washed, shampooed, rinsed, permed, or otherwise processed.


RETENTIVENESS (DURABILITY) OF JOHN-HAIRCOATS

The hair coating effects—such as silky look, wet look, detangling, and damage protection—are retained for approximately
3 to 6 months, or even after dozens of washes.



 
   
     
Q-20260730-UK
How long does 200g last
 

The amount used per wig is actually very small.

As a general guideline, 3 g or 5 g of JK-HairCoat is mixed with approximately 1 litre (1 kg) of water.

With this solution, you can normally treat about five wigs, assuming each wig contains approximately 200 g of hair.

If you are treating only one wig, you do not need to use the entire solution.
For example, you may use a smaller container with 100-200 ml of water, just enough to immerse the hair, and then add the JK-HairCoat in the same proportion.

The important point is to keep the same mixing ratio, regardless of the amount of solution you prepare.

If you are treating several wigs at the same time, you can simply immerse them together and gently turn and press the hair by hand so that the treatment is distributed evenly throughout every wig.

As you can see, one 200 g bottle will last for a very long time in a wig restoration business.

 
 
Would I be able to add a drop to a spray bottle and use it as a leave in conditioner or is that process completely different and it has to be done like your YouTube video ?  

Yes, certainly.

You may also sample one formulation for synthetic hair, so your Sample Kit can include three formulations:

Two formulations -JK7882-SEV, JK7885-RST for human hair (the two I recommended) ;
One formulation, JK7899-FR-HR for synthetic hair (for heat-friendly or normal synthetic hair)

For your first order only, I can make a special exception by offering a Sample Kit.

Instead of one 200 g product packed in a 200 mL bottle, you may choose three different formulations, each supplied
as 100 g packed in a 100 mL bottle.

For three formulations at 100 g each, the total gross weight of the shipment, including the products, bottles,
and packing materials, will be approximately 700 g. Therefore, the applicable FedEx shipping charge will be US$54.10 (FedEx rate for gross weight over 0.5 kg and up to 1 kg) instead of US$43.80 (FedEx rate for gross weight up to 0.5 kg).

However, for a trial/sample kit of three formulations at 50 g each, the total gross weight can be kept within 0.5 kg, so the FedEx shipping charge will be US$43.80, the rate for the lowest weight bracket (up to 0.5 kg).

++

Regarding your second question, yes, spraying is also one of the recommended application methods.

The dipping method shown in my YouTube video is only one application method. Depending on the quantity of hair, the type of product, and the purpose of the treatment, I also recommend spraying, submerging, and several other application methods.

For spraying, the formulation is normally diluted with water. However, the dilution ratio (1 : 100) is usually higher than (3-5:1000) for dipping, because some of the solution is inevitably lost during spraying.

So yes, you can prepare a spray bottle and use it as a leave-in treatment. The important point is not the application method itself, but applying the correct amount of JK-HairCoat as evenly as possible over the hair.

I will also provide the recommended dilution ratios and application methods for each type of hair after your purchase.

 
 
 
Q1. Does John's HairCoats obstruct color dye in dyeing human hair wefts ?  

A thin film (membrane layer) formed by HairCoat may slightly affect dye penetration.

 
 

However, when dyeing is performed with water at a high temperature, HairCoat does not significantly interfere with the dyeing process.

Hair dyes in salons can generally penetrate the HairCoat membrane without major difficulty.

In addition, when the hair is washed with water—preferably hot water—the microscopic pores in the JK-HairCoat membrane temporarily expand, allowing hair dye to pass through the membrane and reach the hair cuticle.

Q2. After Iron-hair straightening, will the effect last ?
 
Yes. The effects of JK-HairCoats remain after hair straightening with a flat iron.  
Q3. Does the JK-HairCoats damage the thread of wefts or affect hair color ?  
No. John’s JK-HairCoat causes no change to the strength or quality of the sewing thread, and it does not affect the color of the hair.  
{Question} I need your coating anti tangle product for cuticle hair.
{Answer} I can recommend JK7881-SoSi, JK7882-SEV, JK7885-RST, JK7888-SHN, JK7889-EmC.
All haircoats are anti tangle products for cuticle hair. Please view the List 1, the web page of .
What is the shelf life of JK-HairCoat?
Shelf Life : Up to 3 years unopened, and about 12 months after opening under proper storage conditions.
Subject : JK-HairCoat™ Spray Application April 4, 2026
{Question} I remember seeing on your website that some people put the hair coat solution into a spray bottle and they spray it on the wig to help to detangle it. Does the solution have to be freshly mixed and still hot? Or can a small batch of the solution be made and last for a few days in a small spray bottle?

{Answer}Yes, JK-HairCoat™ can be used in a spray bottle for light application, such as detangling or surface conditioning.

The solution does not need to be hot, and it is not necessary to use it immediately after mixing.

You may prepare a small batch in advance and keep it in a spray bottle for a few days, provided that:

  • It is stored at room temperature
  • The container is clean and properly closed
  • The solution is not contaminated during use

However, for best performance, we recommend using a freshly prepared solution whenever possible.

Also, please note:
Spray application may result in some loss of solution into the air, so a slightly higher concentration (compared to dipping method) can be helpful.

If you need, I can also suggest an appropriate mixing ratio for spray use.

Best regards,

 
How should JK-HairCoat be stored?

JK-HairCoat should be stored under the following conditions:

  • Keep in a cool and dry place
  • Avoid direct sunlight
  • Store at room temperature (recommended: 5°C–25°C / 41°F–77°F), following standard storage conditions for most chemicals and pharmaceuticals.
    Based on our experience, the product remains stable under normal indoor conditions over extended periods.
  • Keep the container tightly closed
  • Avoid exposure to extreme heat or freezing temperatures

Could you please provide a little more information about the condition of the blonde hair?

  1. When you gently pull the hair strand, does it stretch slightly and return, or does it break immediately?

  2. When you run your fingers along the hair from root to tip, does it feel relatively smooth, or does it feel very rough and resistant?

  3. When the hair is wet, does it become very sticky or gummy, or does it remain relatively firm?

  4. When you comb the hair, does it tangle easily, or does it remain manageable?

  5. Under light, does the hair appear dull, or does it still show some natural shine?

These observations will help me better understand the actual condition of the cuticle and the internal keratin structure of the hair.

 

Please get informed I have been with you while I have not texted you because your questions and words had (?) me to think a lot and say a lot to you.
So, it took time for me to write into English.

Most toupee and wig factories worldwide, as well as most human hair processing and coloring factories, do not use JK-HairCoat.
The main reasons are historical and structural.

First, 40–50 years ago, in Korea (1970s) and later in China (since the 1990s),
technicians who processed and colored raw human hair used industrial silicone oils, simply because there were no alternatives available at that time.
Younger technicians have continued to follow the same methods, learning directly from senior technicians, and this practice largely remains unchanged today.

Even now, many factories in China, India, Indonesia, Vietnam, African countries, Russia, and other regions continue to condition hair using low-cost industrial silicone oils, following traditional methods.

In the past, industrial silicone oil was the only option.
Today, JK-HairCoat exists, but for large-scale wig and hair processing factories, especially in low-wage manufacturing countries, JK-HairCoat is considered too expensive for mass production.
Additionally, most factories are not even aware of the existence of JK-HairCoat.

However, the situation is completely different in the end-consumer market, not the manufacturing market.
In developed, high-wage countries such as the USA and Europe, the retail prices of human hair wigs and extensions are very high.
Considering the function and performance of JK-HairCoat, it is not expensive for end consumers or shop owners in these markets.

More importantly, JK-HairCoat creates an effect strong enough that customers are willing to return for re-conditioning every 1, 3, or 6 months, which is commercially very important.

With conventional industrial silicone oils, the coating effect—such as a silky look and silky touch—disappears after one or two washes.
In contrast, JK-HairCoat remains effective after dozens of washes, although durability varies depending on usage conditions such as wearing frequency, environment, and maintenance.

In hot or harsh environments, hair may dry out faster or the cuticle may become damaged.
In such cases, JK-HairCoat does not disappear by itself; rather, when the cuticle layer is lost, the coating attached to it is lost together.
Even so, this behavior is fundamentally different from industrial silicone oils, which lose their effect after just one or two washes.

 

Remy Hair, Non-Remy Hair, and the Role of JK-HairCoat

Remy Hair

Remy Hair consists of hair fibers whose cuticles are aligned in the same direction, from root to tip.

Because all hair strands follow a uniform cuticle direction, friction between neighboring fibers is minimized. As a result, Remy Hair generally provides:

  • Better combability
  • Reduced tangling
  • Improved softness
  • Greater natural movement
  • Longer service life
  • More natural appearance

When JK-HairCoat is applied to quality Remy Hair, it can further enhance:

  • Soft touch
  • Silk-like touch
  • Silk-like appearance
  • Smoothness
  • Slip and combability
  • Tangle resistance
  • Overall manageability

The ionic coating formed by JK-HairCoat can remain effective through numerous wash cycles and help maintain these desirable hair characteristics for an extended period.


Non-Remy Hair

In contrast, Non-Remy Hair contains hair fibers with mixed cuticle directions.

When neighboring fibers have opposing cuticle directions, the cuticle scales may interlock with one another, creating friction, matting, and tangling.

This structural characteristic is one of the major causes of tangling problems commonly associated with Non-Remy Hair.

JK-HairCoat does not change or correct the mixed cuticle directions that are inherent in Non-Remy Hair.

Therefore, JK-HairCoat alone cannot fundamentally solve tangling problems caused by mixed cuticle directions.

Some improvement may still be achieved when the cuticle scales are relatively flat and smooth rather than rough, lifted, or protruding.

In such cases, JK-HairCoat may help reduce surface friction and improve manageability to a certain extent.


The Most Effective Solution for Non-Remy Hair

For a fundamental improvement of tangling problems, the most effective approach is to first perform
a professional Tangle-Removal Treatment and then apply JK-HairCoat.

Tangle-Removal Treatment is a specialized technique designed to address the root causes of tangling associated with Non-Remy Hair.

When properly performed, it can significantly improve the hair structure and transform highly tangled Non-Remy Hair into a much more manageable condition.

After the Tangle-Removal Treatment, JK-HairCoat can further enhance:

  • Tangle resistance
  • Soft touch
  • Silk-like touch
  • Silk-like appearance
  • Smoothness
  • Combability
  • Manageability

Depending on the condition of the hair, maintenance practices, and washing methods, these benefits may remain noticeable for 3–6 months
or even after dozens of washes.

Training Program

John Korea Co. provides specialized training in professional Tangle-Removal Treatment technology through:

  • Online Training
  • Hands-On Training

Training Fee: US$3,000.00